NACHI-FUJIKOSHI CORP.
Top page > Product Info. > Industrial Furnaces > Thermo System > Vacuum Degreasing Equipment Clean Master
Industrial Furnaces
Main text
Vacuum Degreasing Equipment Clean Master
| Model | NVD-3 | NVD-6 | NVD-10 |
|---|---|---|---|
| Effective dimension WxLxH (mm) |
460 620550 |
610950610 |
7601220760 |
| Gross charge weight (Kg/gross) |
300 | 600 | 1000 |
| Amount of washing solvent (L) |
900 | 1900 | 1900 |
| Amount of heat transfer oil (L) |
200 | 500 | 500 |
| Power requirements (kW) 200V3φ |
45 | 75 | 75 |
| Cooling water requirements (L/min) |
100 | 200 | 200 |
| Supply pressure 0.1 - 0.15MPa, Outer diameter 42.7mm | |||
| Nitrogen gas requirements |
Supply pressure 0.2 - 0.55MPa | ||
| Compressed air requirements |
Supply pressure 0.45 - 0.55MPa | ||
| (Notes 1) | The amount of heat transfer oil is for electric heating specification. |
| (Notes 2) | Although washing time is about 30 minutes in standard specification, it may change with the form of a processing article etc. |
Options
| Heat source | Selection from gas and kerosene is possible |
| Table for charge and discharge | Arranges separately if needed |
| Filter | Corresponds also out of standard |
| Straight through type | Corresponds on demand |
| Short cycle time specification | 20-minute cycle is possible |